|
|
|
Products | Electicity Exploitation Tools | ||
|
|
|
JUPITER |
System for the Pre-Identification of cables and the Identification of their cores |
|
||||||
|
DELTAPHASE |
The DELTAPHASE is an equipment of measurement making it possible to optimize the operation of the distribution networks of energy. It measures the characteristics of the electrical supply networks in real time and allows to identify each phase of the three-phase distribution network. | |||||||
|
NADIR |
Nadir is a tool allowing to pre-identify low-tension cables under tension and in charge in trenches. The measurement is taken at the beginning of the cables |
|
||||||
|
TESTECRAN+ |
Testecran + is used to check the state of the external casing of a HTA or low-tension buried cable. It measures the isolation resistance between the ECRAN and the ground. If failures are noted, corrective measures have to be taken to guarantee in the future the correct functioning of the cable. |
|
||||||
|
TRIPHASEUR |
Triphaseur allows to locate each phase on a three-phased low-tension distribution network in exploitation. It can be used ideally in complement of low-tension recorders and Deltaphase equipment to balance distribution networks. It can work on low-tension networks, in exploitation, on tension, and in charge. |
|
||||||
|
Bag of load |
The charge bag is an equipment used to highlight failures on low-tension networks measured with a Deltaphase. | |||||||
|
SkyLight |
The Skylight is the latest innovative product from MADE. It is a simple, reliable, and economical device that allows to control, during the night, street lamps in the cities or on the highways. Skylight’s development is the result of a strong partnership between MADE and A²S². | |||||||
|
The spirit to make |
||||||||
|
Legal mentions - © Copyright - Made SA - all rights reserved 2006 |
||||||||