Recherchez un produit
 

Electrical operating

Search 12 sheets ( 1 - 10 )
Pre-identify LV and MV off line cables and feeders

Pre-identify LV and MV off line cables and feeders

JUPITER+ consists of a transmitter and a Receiver, both can be used on the electric network, off line and grounded.
Pre-identify the dead cable you need to work on

Pre-identify the dead cable you need to work on

JUPITER is a multifunction equipment intended to aid work such as cable connections and replacement. Used on unpowered low or high voltage networks, it will pre-identify the cable to be worked on, and the phases in the cable quickly and very reliably...
Identification of a live cable low tension

Identification of a live cable low tension

NADIR enables the identification of a live Low Voltage cable and the ID of each phase under load in a trench and at the substation exit.
Balance and optimize your low voltage distribution network

Balance and optimize your low voltage distribution network

TRIPHASOR is an instrument for optimizing the operation of electrical distribution networks. It measures the electric grid characteristics in real time, and permits the identification of each phase on a tri-phase network.
TRIPHASOR is used on live low tension networks, under load...
Phase and depart indicator on live networks

Phase and depart indicator on live networks

M.PAD is a phase and depart indicator to know on which phase and on which depart a customer is connected on a live low voltage network, downstream a transformer post. It is a robust, reliable, and simple to use system.
TEST YOUR MV/LV TRANSFORMERS

TEST YOUR MV/LV TRANSFORMERS

TESTRANSFO2 is a small, self-powered, hand-held instrument which is used to check the functionality of a tri-phased transformer disconnected to the network. Suitable for use on all distribution transformers, it automatically performs a sequence of tests taking only two minutes to confirm that the transformer is functional or not.
Medium voltage fuse tester

Medium voltage fuse tester

TF200 allows a quick and easy check of the state of a medium voltage fuse.
It is able to determine if any one of the fuse conductors is blown.




All the measurements you need  : U, I, P and Cos Ö. Continuity

All the measurements you need : U, I, P and Cos Ö. Continuity

MULTI-Flex™ is a digital multimeter, equipped with a flexible Rogowski coil current transducer (MADE-Flex™) for measuring the voltage and current and for checking the continuity on the low voltage network ...
Data logger - Network analyser

Data logger - Network analyser

TRIDENT is a data logger for recording and analyzing voltage measurements (TRIDENT+: single-phase, TRIDENT: three-phase), currents and powers on electrical networks according to norm EN50160.
TRIDENT is available with or without display.
A H61 cabinet is also optionally available.
Data logger - Network analyser

Data logger - Network analyser

Quadrent is a supervision system and data logger for analyzing
electrical networks.
Quadrent allows control of network quality according to IEC
N50160 and complies with IEC 61000-4-30 Class A.
1 2 >