Recherchez un produit
 

TF200

Medium voltage fuse tester

The MADE fuse tester performs a measurement of the fuse resistance. This measurement is based on the 4 wire measurement method with automatic compensation of the temperature effect on the result.

The fuse tester consists of a rigid case, including:
- An operating panel
- Two measuring clamps
- A self-test system
- A temperature sensor

The fuse test is performed in 4 steps:
- Power on (with automatic self-test)
- Connection of the 2 measuring clamps to the fuse
- Selection of the fuse type from a selection menu
- Measurement of the fuse resistance and immediate display of the result

The type of fuse to be tested is selected from the on-board data base holding the following parameters:
- Voltage
- Amperage
- Trade Mark
- Identifier

The database is generated using a management PC software which can be updated by the user and transferred to the tester via a USB connection
Technical
pdf Product leaflet [26/10/2016 11:47] 232 Ko.
pdf User Guide [26/10/2016 11:59] 253 Ko.
Medium voltage fuse tester
Medium voltage fuse tester Medium voltage fuse tester Medium voltage fuse tester