zoom
TRIPHASOR - Identify phase on low tension  LV network TRIPHASOR - Identify phase on low tension  LV network
zoom
TRIPHASOR - Identify phase on low tension  LV network TRIPHASOR - Identify phase on low tension  LV network

TRIPHASOR - Identify phase on low tension LV network

Identify phases, balance and optimize the electrical network

TRIPHASOR is an instrument for optimizing the operation of electrical distribution networks. It measure the electric grid characteristics in real time, and enable the identification of each phase on a phased network.
TRIPHASOR is used on live low tension networks (LV), under load.

USE PRINCIPLE
Triphasor consists of a transmitter and a receiver, both can be used on a live low voltage LV electric network. The transmitter must be connected in a substation using the voltage LV cords and the current Rogowski clamps. The receiver allows phase identifying wherever it is connected between phase and neutral, anywhere on the live network.

DOWNLOAD

pdf Data sheet [08/06/2021 15:12] 852 Ko.




Categories : Products, Electric operating, Phase and feeder on line controller